28xx Series - 2.8in Projected Capacitance Touch

TM2800/TM2801 shown

The 28xx series is based on a 2.8in touch sensor that is well-suited for smaller designs with low-to-moderate user-interface requirements.

Modules in this series provide quick prototyping options both as addon modules to Atmel Xplained kits, custom hosts or in a stand-alone configuration.

Available Configurations

Product Description
TM2800 2.8in Touch Module - Xplained
TM2801 2.8in Touch Module - Stand-alone (w/ XMEGA256A3BU)
TD2800 2.8in Touch Display - Sensor + Cover Panel + LCD
TP2800 2.8in Touch Panel - Sensor + Cover Panel (no LCD)
TS2800 2.8in Touch Sensor - Sensor Only

Information and links regarding development with these products can be found in the notes section at the bottom of this page.


Details

back to top
TM2800 Sensor + Cover Panel + LCD + Interface PCB
Description 2.8in Touch Module for use with Atmel Xplained kits or custom hosts with the necessary interfaces and I/O to communicate with the touch controller and display hardware.

This module is included in the Atmel mXT143E Xplained kit.
  • Touch sensor with mXT143E controller
  • 1.2mm soda line glass cover panel
  • 2.8in TFT LCD, 320x240
  • SPI interface to ILI9341, optional 18-bit parallel interface
  • Plastic frame
 Where to buy: Digikey
Documents

TM2800 Datasheet

Demo HEX Files for XMEGA-A3BU and SAM4S Xplained MCU boards. Source available from the Atmel Software Framework.
Links

Atmel Studio - Atmel's toolchain and IDE

Atmel Software Framework (ASF)

Atmel Xplained / mXT143E Xplained


back to top
TM2801 Sensor + Cover Panel + LCD + Driver PCB
Description 2.8in Touch Module with ATXMEGA256A3BU on-board ready for stand-alone use.

The TM2801 is a stand-alone version of the TM2800 module. It consolidates the functionality of the XMEGA-A3BU Xplained and mXT143E Xplained kits into a single, stand-alone kit.

  • Touch sensor with mXT143E controller
  • Onboard XMEGA256A3BU Host MCU
  • 1.2mm soda line glass cover panel
  • 2.8in TFT LCD, 320x240
  • SPI interface to ILI9341, optional 18-bit parallel interface
  • Plastic frame
 Where to buy: Digikey
Documents

TM2801 Datasheet

TM2801 ASF Multitouch Demo -  Example TM2801 project based on the ASF MultiTouch Demo. This project consists of the mXT143E Xplained / XMEGA-A3BU Xplained MultiTouch demo example project with some minor tweaks to target the TM2801 hardware instead of the TM2800.

Atmel ATxmega256A3BU Datasheet

Atmel XMEGA AU Manual
Links

Atmel Studio - Atmel's toolchain and IDE

Atmel Software Framework (ASF)

Atmel Xplained / mXT143E Xplained

Atmel ATXMEGA256A3BU Product Page


back to top
TD2800 Sensor + Cover Panel + LCD
Description 2.8in Touch Display
  • Touch sensor designed for use with mXT143E controller
    (not included)
  • 1.2mm soda line glass cover panel
  • 2.8in TFT LCD, 320x240
  • SPI interface to ILI9341, optional 18-bit parallel interface
 Where to buy: Contact PDA
Documents Contact PDA
Links Contact PDA


back to top
TP2800 Sensor + Cover Panel
Description 2.8in Touch Panel
  • Touch sensor designed for use with mXT143E controller (not included)
  • 1.2mm soda line glass cover panel
  • Optional 0.7mm Gorilla Glass™
  • 44.2 mm x 58.6 mm cover panel viewable area
 Where to buy: Contact PDA
Documents Contact PDA
Links Contact PDA


back to top
TS2800 Sensor Only
Description 2.8in Touch Sensor only
  • Touch sensor designed for use with mXT143E controller (not included)
 Where to buy: Contact PDA
Documents Contact PDA
Links Contact PDA

Notes

To get started, visit the links below for Atmel Studio and the Atmel Software Framework (ASF). Atmel Studio is an IDE and toolchain targetting Atmel's MCU products. The ASF provides drivers, code modules and example projects for a variety of solutions and applications - including Atmel's "mXT143E Xplained" kit which includes the TM2800.

Development for the other 28xx series sensors can leverage the "mXT143E Xplained" ASF code with varying degrees of adjustments needed depending on the nature of the interfacing host. For example, the TM2801 module requires minor code changes (as shown in the linked project source above)

Links:

Atmel Studio - Atmel's toolchain and IDE

Atmel Software Framework (ASF) - Atmel's code library of drivers, modules and example projects for various Atmel MCUs.

Atmel Xplained / mXT143E Xplained - Product pages for the Atmel Xplained kits.

© Copyright 2014, Precision Design Assoicates, Inc.