35xx Series - 3.5in Projected Capacitance Touch
The 35xx series is based on a 3.5in touch sensor that is well-suited for smaller designs with low-to-moderate user-interface requirements.
Modules in this series provide quick prototyping options both as addon modules to Atmel Xplained Pro kits or a custom host.
|TM3500||3.5in Touch Module - Xplained|
|TD3500||3.5in Touch Display - Sensor + Cover Panel + LCD|
|TP3500||3.5in Touch Panel - Sensor + Cover Panel (no LCD)|
|TS3500||3.5in Touch Sensor - Sensor Only|
Information and links regarding development with these products can be found in the notes section at the bottom of this page.
|TM3500||Sensor + Cover Panel + LCD + Interface PCB|
3.5in Touch Module for use with Atmel Xplained kits,
Xplained Pro kits or
custom hosts with the necessary interfaces and I/O to communicate with the touch controller
and display hardware.
||Where to buy:||Digikey|
Atmel Studio - Atmel's toolchain and IDE
|TD3500||Sensor + Cover Panel + LCD|
3.5in Touch Display
||Where to buy:||Contact PDA|
To get started, visit the links below for Atmel Studio and the Atmel Software Framework (ASF). Atmel Studio is an IDE and toolchain targetting Atmel's MCU products. The ASF provides drivers, code modules and example projects for a variety of solutions and applications.
Development for the 35xx series sensors can leverage the "mXT143E Xplained" ASF code with varying degrees of adjustments needed depending on the nature of the interfacing host.
Check Back Soon! Direct development support for the TM3500 hardware is coming!